Ελληνικά
Ο φορτιστής XTAR VC2 είναι ο πρώτος φορτιστής ιόντων λιθίου στον κόσμο που διαθέτει μια οθόνη LCD σαν στροφόμετρο.
Αυτός ο φορτιστής θα σας πει την πραγματική δύναμη της μπαταρίας σας!
Ο VC2 όπως όλοι οι φορτιστές, μπορεί να προσδιορίσει έξυπνα την ισχύ εισόδου και ρυθμίζει αυτόματα το ρεύμα φόρτισης (0.15A ~ 0,5).
Και τα δύο κανάλια είναι ανεξάρτητα.
Όπως όλοι οι φορτιστές XTAR, ο VC2 έχει προστασία υπερφόρτισης, προστασία από βραχυκύκλωμα και προστασία αντίστροφης πολικότητας.
Ο VC2 μπορεί να αναζωογονήσει υπερβολικά αποφορτισμένες μπαταρίες.
Συμβατός με: 10440/14500/14650/16340/17500/17670/18350/18500/18650/18700/22650/25500/26650 3.6/3.7V Li-ion batteries
Η συσκευασία περιλαμβάνει:
- VC2 charger
- MicroUSB cable
- Microfiber carrying pouch
- User manual
- Warranty card
Input DC: 5V 1.0A
Max Constant Charging Current: 500mA*2
Cut-off Voltage (Output Voltage): 4.20V
Cut-off Current: ≤80mA
Working Temp: 0-40℃
Net Weight: 109g
Dimensions: L131*W66*H33mm
Features:
- Compatible with IMR lithium battery
- Each channel is independent
- Three-stage charge algorithm(TC-CC-CV)
- Soft-start function, to avoid damage from large charge current while charging.
- Automatically cut off when the battery is charged fully
- Precision cut-off voltage at 4.2V
- Compatible with small capacity battery
- Over heat protection
- LCD displays each battery real time statues
- Use high power intelligent step-down DC - DC circuit, greatly reduce the energy loss;
- Built-in reverse-polarity and short-circuit protection circuit
- Use fireproof material for the shell
- 0V activation function can wake up the over-discharged/sleeping batteries
- 120°angle high definition VA screen to display the charging current ,voltage and power indicator, you can see the charging status from any angle of view.
- Certified by CE, RoHS
- Each channel is independent
- Three-stage charge algorithm(TC-CC-CV)
- Soft-start function, to avoid damage from large charge current while charging.
- Automatically cut off when the battery is charged fully
- Precision cut-off voltage at 4.2V
- Compatible with small capacity battery
- Over heat protection
- LCD displays each battery real time statues
- Use high power intelligent step-down DC - DC circuit, greatly reduce the energy loss;
- Built-in reverse-polarity and short-circuit protection circuit
- Use fireproof material for the shell
- 0V activation function can wake up the over-discharged/sleeping batteries
- 120°angle high definition VA screen to display the charging current ,voltage and power indicator, you can see the charging status from any angle of view.
- Certified by CE, RoHS
How to test your batteries mAh capacity:
Step 1: Insert your discharged battery (at a discharge cut-off voltage generally below 3.0V)
Step 2: Let the battery charge and notice the 0000mAh displayed on the screen. Do not remove the battery until the charge is complete.
Step 3: When the battery is fully charged, the screen will show "FULL" and the entire screen will flash 3 times every 10 seconds.
Step 4: The mAh on the screen should now give you the batteries actual capacity.
Step 3: When the battery is fully charged, the screen will show "FULL" and the entire screen will flash 3 times every 10 seconds.
Step 4: The mAh on the screen should now give you the batteries actual capacity.
Recently Viewed Products
-
Sold
-
-
-
-
Sold
-
